Can you image a vape atomizer that is perfect for both MTL and DTL? In the following, we’ll take a look at such an RTA. Just buy from online vape shops if you like. Ok, here we go!
Damn Vape Fresia RTA is a 22mm MTL / Restrictive lung hit flavor RTA. It’s 2ml / 3.5ml in capacity and available for High / Med / Low concentration of Nic Salt or Regular e-liquid (Freebase e-liquid). It also features the world’s first T.I.T. (Tube In Tube) AFC system, that means you can switch freely between MTL and restrictive lung through AFC ring, but without changing any airflow reducer / cube. In addition, the compact chamber, bottom airflow, and raised build deck will bring closer throat hit… Overall, the Fresia is all for flavor! 4 colors are available.
Parameters are as below:
Material: Stainless Steel
Size: 22 x 43.4mm
Capacity: 2ml/3.5ml (Extra bubble tube)
Coil ID: 2.5mm(recommend), 3mm
Drip Tip Type: 510 (1 x 4mm bore, 1 x 5mm bore)
MTL Holes: 0.8 / 1.0 / 1.2 / 1.6mm
Restrictive Lung Max Flow: 2 x 9mm + Ф1.6mm
Thread: 510 thread
You may also like this: https://vapesourcing.com/vandy-vape-berserker-v1-5-rta.html
Related blog: Vandy Vape AP Kit Preview-Waterproof & Shockproof & Dustproof
With the development of technology, Vape devices are being designed to apply to different environments. Vandy Vape has just released such a kit which is waterproof, shockproof and dustproof.
Vandy Vape AP Kit is another masterpiece after Geekvape Aegis series kit for excellent waterproof (IP66) that is free of worry for rains or dropping by accident. It is made of TPE material and comes with hardcore appearance, brings you a cool and stylish visual experience. Powered by 900mAh internal battery, it can support normal use for 2 days on full battery condition. Meanwhile, it supports voltage output mode and adopts 5 voltage level from 3.2-4.0V.
As for the paired tank, it has 2ml e-juice capacity to satisfy your daily need. With top-filling design, you can easily refill the juice by twisting off the top cap. MTL coils (compatible with Berserker MTL coils) and multidirectional adjustable air holes are adopted to produce rich and fine flavors. The best-adapted power for the coils is 7-13W. Overall, it’s really worth a shot if you’re looking for an ideal MTL set up.
Parameters are as below:
Material: TPE (Thermoplastic Elastomers)
Size: 114mm x 27.9mm
900mAh Internal Battery
Output Power: <20W
Working Voltage: 3.2V – 4.2V
Working Current: <6.5A
Output Voltage: 3.2V – 4.0V
Coil Resistance Range: 0.6 ohms – 3 ohms
Output Mode: Voltage
Standby Current: <20uA
eJuice Capacity: 2mL
You may also like this: https://vapesourcing.com/freemax-twister-kit.html
Related blog: SMOK Nord+Mr Salt E Grapplemelon-An Ideal Match For Christmas Party
Do you like the taste of apples or watermelons? Can you imagine a mixture of the two tastes? Today we’ll be covering such a cheap e juice from Mr Salt E, along with an ideal pod device for it.
Firstly let’s look at the pod device – Smok Nord Kit. It is loosely based on the recent Smok Novo Kit – which looks very similar. However, the Nord is an upgrade to the Novo. Obviously, the Nord is a lot bigger than the Novo as the battery is a larger capacity. The Novo has a 450mAh battery and the Nord has a great 1100mAh. The power output at 10-15W is similar. You also get a handy LED indicator to tell you the battery capacity remaining.
The part of the kit which holds the e-liquid is called a “pod” and it is refillable by removing the plug on the side of the pod. In the Novo kit, a 2ml pod was standard – the Nord has a 2ml option for EU countries or a 3ml standard option. This time the coil is replaceable – so you don’t have to discard the pod when the Smok Nord Replacement Coils are past its best. Even better there are 2 coil options – a DTL 0.6ohm mesh coil and a MTL 1.4ohm coil. Both options are included in the kit. 6 colours available.
As for the Mr Salt E Grapplemelon. It has been one of the most sought-after fruit flavored nic-salt e-liquids in the entire vaping industry. Stuff your face into a tart and juicy grapple (tastes like a grape, feels and looks like an apple!) and sweet wild watermelon, specially designed for you as your personal cornucopia! At last, the VG/PG ratio of 60/40 is perfect for the MTL vaping.
Related blog: What VG/PG Ratio Of E-juice Works Best On The GeekVape Flint Kit?
Do you prefer MTL vaping or DTL vaping? Today we’ll be covering a perfect pair of a MTL kit and the best NKD 100 e-juice for it. Maybe you’ll go on a fantastic vaping trip with them.
Firstly is the GeekVape Flint Kit. It includes the Flint Vape Pen style mod and the Flint tank. The mod has 3 power settings – 7W (low), 8W (medium) and 9W (high). Altering these power settings will increase the flavor/heat output of the vapor. The LED displays which power setting you have chosen. Inside the mod is a 950mAh internal battery and again the LED shows the battery capacity remaining. Apparently, this kit is water resistant. It has an IPX5 rating so a leaky tank or a bit of rain should not damage the internals of the mod.
The Flint MTL tank is designed for MTL vapers. It has 5 different sized airflow inlets and you can adjust the airflow to your preference by rotating the ring at the base of the tank. A sliding top cap allows you to fill the 2ml capacity tank through the top. The NS coil is designed for Nicotine Salts or high nic e-liquid and has a 1.6ohm resistance. Anyway, the Flint kit is a good choice for MTL vapers.
Then is the well-matched NKD 100 Salt Lava Flow e-juice. Who would have thought that succulent strawberries, milky coconut, and sweet pineapple that leaves behind a tingling sensation that is to die for would create one of the most flavorsome juices in circulation? NKD did and it’s called Lava Flow. As you inhale Lava Flow the impeccable salt nicotine juice, your taste buds will be jumping for joy as milky strawberries tingle the tongue. The best part about this vape juice is that the milky flavor comes from the coconut giving it a more refreshing taste than normal milky flavors. As you exhale, the pineapple will make you shiver with how it makes your taste buds tingle and how accurate the taste is.
Related blog: Pair OVPO Topside Mod With Bonza V1.5 RDA To DIY A New Kit For Squonk Vaping
Recently I’ve been doing some squonk vaping. Thereupon, I found some good pairs of squonk mods and RDAs. Today I’gonna share one.
Firstly let’s look at the Vandy Vape Bonza V1.5 RDA. It is 24mm in diameter and is 38mm tall from drip tip to the base of the contact point. This upgraded version of the Bonza has a dual post, quad terminal style build deck with top mounted slotted Phillips screws; additional Flathead screws are included in the accessories pack. Inner terminals of the build deck feature a revamped clamp system with expanded 5mm by 5.9mm by 2mm clamps with knurled patterning for enhanced for coil lead grip. The new Phillips screws have reduced threading to allow for a more convenient building experience. The stainless steel build deck has a raised build deck and recessed 9mm juice well.
Vandy Vape has modified the airflow adjustment of the Bonza to allow more precise control. They have retained the 15 air hole per side design but has moved on from the slotted top cap to a new segmented airflow control that allows the user to cover a single 1mm air hole at a time. The Vandy Vape Bonza V1.5 has a pre-installed gold plated 510 contact and a spare squonk pin. Included in this package is a pre-installed 8mm wide 810 bore resin drip tip, a spare 8mm wide 810 Delrin drip tip, and a 510 drip tip adapter. The Vandy Vape Bonza V1.5 24mm RDA is a redesigned atomizer with modifications made with an improved user experience in mind.
The matched squonk mod is DOVPO Topside Mod. It is made in collaboration with The Vapor Chronicles, deploying the first top-fill squonk mod design with 10mL max capacity, single 21700 platform, and an intelligent chipset with BYPASS and optional Temperature Control. The construction of Zinc Alloy and Aluminum Alloy makes it moderately impact-resistant in an ergonomic shape, with parts that have contact with eLiquid are made from food-grade Stainless Steel and silicone.
The Topside has a single battery bay for a high-amp 21700 battery (sold separately) while leaving space for a 10mL squonk bottle adjacent for today’s popular eJuice. Within the unit, the squonk bottle can be filled from the top, after unscrewing a knurled and threaded top cap. The squonking action on the Topside mod is found the opposite of the firing button and display face and is made from food-grade silicone for a truly unique design. The leak-resistant 510 base is useful that it will not allow juice within the internals. Furthermore, the 510 base is gold-plated and spring-loaded for the best possible conductivity.Squonk
You may also like this: https://vapesourcing.com/vandy-vape-bonza-kit.html
Related blog: Vapor Storm Subverter Mod Preview-Portable Size But Powerful Output
This time I’m gonna introduce a new vape mod from Vapor Storm-the Subverter. It is a beautiful little mod with hollow side panels which make it extremely lightweight. At my first glance, I was attracted by it and I think you’ll love it.
The Vapor Storm Subverter Mod can output up to 200W using dual 18650 batteries. There is a 0.96in colour screen on the side along with the USB port, adjustment buttons, and fire button. The side panel pulls off to access the battery compartment. There is apparently a 5V/1.5A fast charging capability which promises to balance charge the batteries – i.e. make sure both are charged equally.
However, as with all removable batteries, it is recommended to use a good quality external charger and be aware of battery safety. Looking at the dimensions on the specs this should be able to use up to a 27mm diameter tank – but some of the 3D effects on the side panels may be included in the 27mm width. There are plenty of features in this toy like mod – Variable Wattage, Temperature Control, TCR and adjustable power curves too.
Parameters are as below:
Material: ABS plastic
Battery: dual 18650 battery(not included)
Voltage range: 0.5V-8.0V
Resistance range: 0.05-3Ω(power mode); 0.05-1Ω (TC mode)
Coil supporting: Kanthal, Ni200, Ti, SS, etc
Wattage range: 5.0W-200W
Temperature range: 100-300°C (200-600° F)
Fast balance charging: DC 5V/1.5A
Screen: 0.96in colour screen
Mode: VW, TC, TCR, adjustable power curves
You may also like this: https://vapesourcing.com/vsticking-vk530-mod.html
Related blog: Two Cost-effective Voice Control Kits Around 230W-SMOK I-PRIV & IJOY Avenger 270