We all know that pod mod devices have almost completely taken over the vape market, this time the bandwagon has driven through IJOY-land! Let’s take a look at the IJOY Jupiter Kit, don’t miss out on it if you like.
IJOY Jupiter Kit perfectly combines fashionable design with metal and leather, so it not only looks good but also feels comfortable in the hand. Powered by a single 18650 battery and driven by the advanced UNIV chipset, it can fire from 5-70W and features a range of safety features. The control face is located on the front of the device, a glossy panel hides a fire button, a 0.96inch TFT color display screen, two adjustment buttons, and also a micro USB port. Charging is done via the USB port and the screen will show all your vaping data.
As for the pod, it has a whopping capacity of 5ml and is refillable via a bottom filling port. With purchase, you can get a 0.2ohm J1 Mesh Coil and a 0.6ohm J2 Mesh Coil. But don’t assume that the device only applies to DTL vaping as the pod is also compatible with an RBA coil. Moreover, the mod can also work with a 510 adaptor which allows you to use standard 510 fitment tanks. At last, the airflow is not adjustable on this device, but this is nothing much if you are not very strict in it. Overall, I think the Jupiter Kit is worth a shot.
You may also like: target pm80 near me
Parameters as below
Material: Aluminium & Zinc Alloy & Leather
Size: 117(height) * 30(length) * 25.5(width)mm
Battery: Single 18650 (Not Included)
Output Power: 5-70W
Output Voltage: 3.2-4.2V
E-juice Capacity: 5ml
Fill Method: Bottom fill
Fill Type: Silicone cover
Screen: 0.96 inch
Charging Port: Micro-USB port
Related blog: Even Better Than Vinci Series? | VOOPOO Navi Kit
Have you used the Vinci series by VOOPOO? This time let’s take a sneak peek at the VOOPOO NAVI Kit which is even better than the Vinci series. It has not been released on VOOPOO’s official site so far, but there is some information about it on VOOPOO’s facebook and twitter.
VOOPOO NAVI Kit looks a bit like a longer SMOK Fetch Mini in appearance. The front panel is made of special materials, you will get different color perceptions from different angles, and the NAVI logo on the back panel reminds me of the DRAG series. It’s still not clear that the NAVI is powered by what kind of battery. But it is very likely to be powered by replaceable batteries as the back panel appears to be removable. And from the size of the mod, I bet the maximum power output wouldn’t be lower than 80W. The kit can be activated either by inhaling or pressing the fire button on the side. Below the concave fire button, there is a large LED display screen, an adjustment button, and a micro USB port for charging and firmware updates.
As for the rectangular pod, it is refilled via a bottom filling port but there is no information about the capacity yet. The pod is not only compatible with almost all PNP coils by VOOPOO but also compatible with VOOPOO’s RBA coils, so there are kinds of options to meet your different needs. Airflow wise, the NAVI comes with an innovative triple airflow system, with it you can effortlessly tailor the airflow to your preference. All in all, I believe the NAVI Kit could pose a huge threat to its competitors.
You may also like: hellvape grimm kit near me
Parameters as below
Related blog: Vandy Vape Mesh V2 RDA Preview | A Must-have For Mesh Lovers
I’ve been looking for a decent Christmas vape sale recently. Yesterday, I found the latest Widowmaker RTA and Mesh V2 RDA by Vandy Vape. In the following, I’m gonna share the Mesh V2 RDA. Just buy from vapesourcing online shop if you like it.
Vandy Vape Mesh V2 RDA is the follow up to the original Mesh RDA. Built with stainless steel and Resin, it’s safe and durable for long term use. Inside the chamber, there is a postless clamp deck for coil building. And the deck comes with a spring-loaded block that’s similar to the one on the Profile RDA, it can help you keep the mesh coil in contact with the cotton and prevent revolting dry hits.
In addition, the Mesh V2 has a deep juice well and comes with a squonk pin, which means this should be good for drippers or squonkers. Airflow wise this is adjustable and the inlets are in the top section of the barrel to eliminate the chance of leaky bottom airflow struggles. Anyway, I think the Mesh V2 is a worthy competitor of the Profile RDA and I think most mesh lovers would be happy with it. 7 colors to choose from.
You may also like: topside dual cheap
Parameters as below
Material: Stainless Steel + Resin
Airflow: Adjustable Top Airflow
Mesh Wires: Dual M Coil, 17*9.8mm, 0.15ohm, 45-70W
Ni80 M Coil, 17*9.8mm,0.15ohm, 55-70W
A1 M Coil, 17*9.8mm, 0.15ohm, 50-65W
SS316L M Coil, 17*9.8mm, 0.12ohm, 50-70W
Related blog: Is This Your Cup Of Tea? | Teslacigs Punk Pod Kit 620mAh