Although Aegis Boost is the first pod mod kit by Geekvape, it is full-fledged and excellent. I like it very much and that’s why I’d like to share it in this article. For spring festival vape deals, just check vapesourcing online shop.
Geekvape Aegis Boost Pod Mod Kit continues the standard Aegis color frame accent and the leather backing, it is rugged and IP67 rated for dust and water-resistance. Powered by a built-in 1500mAh battery, Aegis Boost also uses the AS Chipset which fires super fast at about 0.08s with slightly cut down maximum power output of 40W. On the control face, there is a faceted fire button, a small monochrome screen, and a rocker-style button. Five clicks of the fire button will turn the device on and off, the rocker allows you to set the wattage from 5-40W in 0.5W increments. The micro USB charging port is placed at the side of the device behind a rubber plug, it charges at a rate of 5V/1.5A so tops ups are relatively quick.
Moving on to the pod, it holds 3.7ml of e-juice and has an easy access fill port located on the top. Right next to the fill port it also has an interesting airflow control dial which you can adjust from a full open DL hit to a fairly tight MTL hit. There are two coil options in the box, the 0.6ohm coil is rated for 15-25W and the 0.4ohm one is rated for 25-33W. Moreover, Geekvape also provides an RBA deck for the Boost, it looks good, seems to be able to accommodate small exotic coils, and would be a nice option for those who are not interested in buying coils in the long run. Overall, you simply can not go wrong with the Aegis Boost.
You may also like: ohm vape aio review
Parameters as below
Size: 106.8 * 27.7 * 39.2mm
Material: Zinc alloy + Top grain leather + Silicone
Battery Type: 1500mAh built-in
Output Power: 5-40W
Output Voltage: 1.0-6.0V
Input Voltage: 3.0-4.25V
Screen: 0.42″ OLED display
Charging: Micro USB, 5V/1.5A
Firing speed: 0.08s
Pod Capacity: 3.7ml
Refill Method: Top filling
Coil Resistance: 0.6ohm KA1 mesh coil(20-25W)
Color: Aura Glow, Almighty Blue, Space Black, Devil Red, Gunmetal
Related blog: Thinner And Lighter Than The VINCI-VOOPOO VINCI AIR Kit 30W
The VINCI range has been a big hit in recent months. This time VOOPOO come back again with their latest VINCI AIR which is much cheaper than its predecessors and also easier to use. In the following are more details about it. For vape buy one get one free, just check vapesourcing online shop.
VOOPOO VINCI AIR Kit basically continues the form factor of its predecessors but 30% thinner and 20% lighter. Moreover, it adopts the same matte metal painting process as cars and has a further texture. Powered by a built-in 900mAh battery and driven by a GENE.AI Chip, VINCI AIR can be activated either by inhaling or via a fire button and features a wide output range from 5-30W. Charging is done via a 5V/1A micro USB port on the side of the device, and there is a beautiful, inward-looking screen that displays parameters and the number of suction ports in real-time.
As for the pod, it has a maximum capacity of 4ml and is still refilled via a side filling port. With purchase, you can get two dedicated coils from the kit, 0.6Ω PnP-VM4 for massive vapor, and 1.0Ω PnP-R2 for excellent MTL experience. In addition, the pod is compatible with several other PnP coils, just pull and push and then enjoy different vaping experience, fast and affordable. Airflow-wise, VINCI AIR retains the innovative Dual Airflow System. Try turning the atomizer 180° and inserting it, you will get two completely different mouthfeel experiences. Lastly, the airway design has been specially optimized, bringing unparalleled comfort to MTL and Half-DL.
You may also like: rpm40 near me
Parameters as below
Material: Zinc Alloy+PCTG
Size: 100.9 * 27 * 18mm
Battery: 900mAh (Built-in)
Power Range: 5-30W
Output Voltage: 3.2-4.2V
Capacity: 4ml/2ml (TPD)
Resistance Range: 0.1-3.0ohm
Standard Coils: PnP-VM4 0.6ohm / PnP-R2 1.0ohm
Compatible Coils: PnP-VM3 / PnP-R1 / PnP-RBA
Colors: Carbon Fiber, Camouflage, Space Gray, Classic Blue, Classic Red, Aurora, Aurora Blue
Related blog: Guides To The 80W Mechlyfe Ratel XS Kit
Which device is the best pod vape system in your mind? In mine, it is the Ratel XS by MECHLYFE. Let me share it in the following, and you can buy from vapesourcing online shop if interested.
MECHLYFE Ratel XS Kit is quite different from its predecessor though they share a similar name. As with the original Ratel, Ratel XS is still powered by a single 18650 battery and can fire from 5-80W. Apart from the VW mode, it also supports VV mode, TC mode (Ni/Ti), and BYPASS mode, this offers you more fun of operating. On the front of the device is where the display screen and firing button is located. On the inside, when taking off the panel, is where you’ll see both the wattage adjustment buttons and pod cartridge.
Speaking of the pod cartridge, it has a huge capacity of 5.5ml and supports coil building, refilling is done via an easy top filling structure. Inside the pod is a two-post build deck, it allows you to install your own coils. Wicking is quite easy too since there are two generously sized wicking channels. Simply fluff your cotton, and gently pack it into the channels, and you’re good to go. At last, there is an AFC ring on the bottom of the pod, with it you can tailor the airflow as you want effortlessly. Overall, you can not go wrong with the Ratel XS.
You may also like: lyra pod near me
Parameters as below
Dimensions: 87mm x 52mm x 25mm
Material: Aluminum + Resin
Battery: 1 x 18650
Output Wattage: 5-80W
E-liquid Capacity: 5.5ml
Voltage: 0.5-8V Adjustable
Resistance Range: 0.05-3.5ohm
Colors: Black & Carbon Fiber, Gun Metal & Carbon Fiber, Brushed SS & Carbon Fiber, Brushed Gun Metal & Carbon Fiber, Black & Resin White, Black & Resin Green, Black & Resin Red, Black & Resin Blue
Related blog: A Perfect Combination Of Metal & Leather | IJOY Jupiter Kit 70W