Vapelustion Hannya 2 Box Mod – get you to full power in no time

Vapelustion Hannya 2 Box Mod with new molding, ergonomic design, HD OLED display, 230 watts power, temperature controlled operation, extensive security protection, dual 18650 batteries (not included), replaceable panels and fast 2 amp Micro USB charging port.

Vapelustion Hannya 2 Box Mod review
Vapelustion Hannya 2 Box Mod review

Specifications
Graffiti Mod
2 sets of different panels included in the package
Crystal clear OLED display
Uses dual 18650 batteries(not included)
2A micro USB charging system
Maximum power: 230W
OLED display with vertical menu

The Hannya V2 230w Box Mod is powered by dual 18650 batteries (Not Included) and can provide a impressive 230w output. The USB Type-C charging board creates a simple and fast charging input and will get you to full power in no time.

The Hannya II Box mod comes complete with 4 different panel designs which are easily replaced thanks to the magnetic strips on each side of the device whilst also keeping it nice and sturdy when in use.

Vapelustion Hannya 2 Box Mod for sale
Vapelustion Hannya 2 Box Mod for sale

Batteries can be installed simply and removed just as simple, simply remove both side panels and push the batteries out via the openings. The Proprietary chipset used features a simple and user-friendly interface providing you with bright and clear read-outs of your Voltage, Wattage, Puff time, Puff Counter, and resistance of the coils.

The Chipset also features multiple modes to choose from to ensure the perfect vape for each and every person.

Other kits you may prefer:
draco vape
smok vapes

Geekvape Aegis Max Box Mod: Powerful Single Battery Vape Mod

As the GeekVape Aegis is the most well-known mod series, GeekVape will never let us down. Last time I reviewed Aegis Boost Plus, maybe you will like. So this time they introduce us the new GeekVape Aegis Max Mod.

geekvape aegis max mod

Geekvape Aegis Max Box Mod 100W comes with
1 * Geekvape Aegis Max Mod
1 * 18650 Battery Adapter
1 * Battery Door Assist Tool
1 * USB Cable
1 * User Manual

The GeekVape Aegis Max Mod is the latest in a long line of Aegis products. It all started with the original, which pioneered the way for the IP67 shock-resistant and water-resistant vape mods on the market.

Since then, they have had many products in that line like the Aegis Legend, the Aegis X, and the line of Aegis AIOs and pod systems.

The GeekVape Aegis Max Box Mod stands at 93mm x 46.3mm x 34mm, which is a bit larger than the Aegis solo due to the 21700 compatibility. It is a small and lightweight mod that fits nicely in my hand.

Driven by a single 21700 battery, the GeekVape Aegis Max Mod can fire up to 100W. You can also install a 18650 battery using the battery adaptor included in the kit.

The Geek Vape Aegis Max Mod will do from 200-600°F in Temperature Control Mode and supports for SS, NI200, and Ti material. VPC mode allows you to configure a wattage curve with up to 5 different wattages.

You may also like:

I Love Salts E-Liquid

maskking high gt disposable

Dovpo Odin Mini DNA75C Box Mod – what the difference with the former Dovpo mod?

Well, for a snack we have a very interesting copy. The tripartite collaboration that brought Dovpo Odin Mini box mods to the world is back in business. This trinity is already the third instance in the series, the most interesting thing in it, most likely, is that it has become single-bank.

Dovpo Odin Mini DNA75C Box Mod review
Dovpo Odin Mini DNA75C Box Mod review

Parameters
Dimensions: 90.5 x 36.3 x 32mm
Case material: aluminum alloy + plastic
Power: 1 x 21700
Chipset: Evolv DNA75C
Output power: 1 – 75W
Voltage range: up to 9V
Operating mode: VW, TC (NI200, SS, TI), TCR
Temperature range: 200 ℉ – 600 ℉ / 100 ℃ – 315 ℃
Supported resistance: 0.05 – 2.0Ω / TC 0.05 – 1.0Ω
Protection: against low / high resistance, against overheating, against short circuit, against reverse polarity, against overcharging / overdischarge
Connector type: steel 510, gold-plated pin, spring loaded
Screen / diagonal: yes, color, 0.96 ”

The design is very recognizable – the fact is that developers of Dovpo do not depart from corporate design even one iota. We are again greeted by a lightweight aluminum alloy casing, scribbled on the sides with pretty through vents.

On the front part, a control panel is cut in a familiar way, and on the sidewall a traditional logo is visible. The color scheme is also standard for this line. The connector platform is steel, moreover, our guest boasts an impressive margin of landing – 26mm.

Dovpo Odin Mini DNA75C Box Mod for sale
Dovpo Odin Mini DNA75C Box Mod for sale

The control panel contained the already familiar fire button with a skull, a color display of a standard diagonal and a traditional trio of adjustment and control keys. At the very base, you can see the old-style connector for slow charging and updating the control chipset software.

As in older versions, due to the presence of through slots leading to the battery compartment, several multi-colored shrink films for batteries are thrown into the box mod with the novelty.

Other mod we recommend:
dovpo mono sq signature mod

Review: Cloud Odin 200 Box Mod VS original Dovpo Odin DNA250C Mod

The Dovpo Odin DNA250C Mod made in collaboration with Vaperz Cloud & Vaping Bogan is an advanced vaping device that features a versatile dual battery design, a unique outer body design, an ergonomic body shape with fin cut-outs to create an added grip, and a high power output with TC and TCR Mode included.

Dovpo Odin DNA250C Box Mod review
Dovpo Odin DNA250C Box Mod review

This device features the Evolve DNA250C chipset, which uses sophisticated and calibrated heating algorithms to deliver the better flavor. The chipset also includes Power Mode, TC Mode, and TCR Mode.

So in the original Odin DNA mod there was an Evolv DNA250C chip. These are very popular but can be a bit pricey. DNA enthusiasts are usually happy to pay the extra for a DNA chip but it does often make mods out of the price reach of many people.

To hopefully open up the market a bit for the Odin box mod – the 200 version has a Dovpo chipset rather than the expensive DNA chip.

Also to help reduce the price the materials used are different rather than the CNC machined aluminium body on the DNA version, the 200 has zinc alloy top and bottom plates and polished CNC aluminium body.

Dovpo Odin 200W Box Mod for sale
Dovpo Odin 200W Box Mod for sale

As with the original this is still designed to use 2×21700 batteries. But you can also use dual 20700 or 18650 with the enclosed adaptors.

Power wise this will still output up to 200W and there are variable wattage, variable voltage, TCR and temperature control user modes. The same group were involved in the design of the 200 version.

Summary
The ODIN 200w is a very similar look and feel to its DNA250c brother with different features, rather than using an Evolv DNA chipset it now features a Dovpo own 200w chipset, utilizing USB C Updating and charging port with a zinc alloy construction.

Other box mod we prefer recommend you:
aspire glint mod

Vapor Storm Subverter Mod Preview-Portable Size But Powerful Output

This time I’m gonna introduce a new vape mod from Vapor Storm-the Subverter. It is a beautiful little mod with hollow side panels which make it extremely lightweight. At my first glance, I was attracted by it and I think you’ll love it.
Vapor Storm Subverter Mod PriceThe Vapor Storm Subverter Mod can output up to 200W using dual 18650 batteries. There is a 0.96in colour screen on the side along with the USB port, adjustment buttons, and fire button. The side panel pulls off to access the battery compartment. There is apparently a 5V/1.5A fast charging capability which promises to balance charge the batteries – i.e. make sure both are charged equally.
However, as with all removable batteries, it is recommended to use a good quality external charger and be aware of battery safety. Looking at the dimensions on the specs this should be able to use up to a 27mm diameter tank – but some of the 3D effects on the side panels may be included in the 27mm width. There are plenty of features in this toy like mod – Variable Wattage, Temperature Control, TCR and adjustable power curves too.

Parameters are as below:
Material: ABS plastic
Size: 90.2x55x27mm
Battery: dual 18650 battery(not included)
Voltage range: 0.5V-8.0V
Resistance range: 0.05-3Ω(power mode); 0.05-1Ω (TC mode)
Coil supporting: Kanthal, Ni200, Ti, SS, etc
Wattage range: 5.0W-200W
Temperature range: 100-300°C (200-600° F)
Fast balance charging: DC 5V/1.5A
Screen: 0.96in colour screen
Mode: VW, TC, TCR, adjustable power curves

You may also like this: https://vapesourcing.com/vsticking-vk530-mod.html

Related blog: Two Cost-effective Voice Control Kits Around 230W-SMOK I-PRIV & IJOY Avenger 270

Asmodus Amighty-A Latest Touch Screen TC Mod You May Like

This I’m gonna share a latest vape mod. It is from the Asmodus and called Asmodus Amighty. Just get one from the cheap vape online shop if you like. Ok, here we go!
Asmodus Amighty Mod PriceAsmodus Amighty Mod, powered by single 18650/20700/21700 battery, equipped with the high-quality GX-100UTC chipset, is able to reach up to a maximum output power of 100W. The Amighty Touch Screen Mod has all the usual functionality such as temperature control with support for TFR and TCR, as well as enhanced firing mechanics such as Curve mode and Taste settings (Soft, Normal, and Hard).
Many mods claim to be crafted with ergonomics in mind but this device truly contours to your hand and snugly nestles in your hand. Vapers can simply press the fire button 5x times in quick succession to access the menu. Once in the menu swiping left and right will cycle through all the menu options.

Parameters are as below:
Work efficiency: 94%
Standby time: 3s- 60s
Firing cut off time: 10s
Charging parameter: DC 5V/1A
Display operating current 25mA
Standby operating current: <350uA
Resistance range: 0.1Ω- 3.0Ω
Temp range: 212- 572°F/ 100- 300℃
Maximum output voltage: 7.5 Volts
Maximum output current: 35.0 AMPS
Output power range: 5- 100W (Power Mode)
Output power range: 5- 60W (TC Mode)
Powered by single 18650/20700/21700 battery
(Batteries are Not included)

Related blog: Two Superior Pen Kits You Can’t Miss-Eleaf iJust ECM & Joyetech ULTEX T80

Arctic Dolphin Kurve Mod Or Vsticking VK530 | Which Is Better?

Today I’m gonna introduce two high-performance TC box mods. One is called Arctic Dolphin Kurve and the other is named Vsticking VK530. It’s easy to get them from the best online vape store if you like. The following are the details.

Firstly is the Arctic Dolphin Kurve Box Mod

Arctic Dolphin Kurve Mod is a solid and colorful mod which has an ergonomic shape to fit your palm. In the front, there is a 0.96inch OLED white screen, the screen display will inform you essential parameters you need. It also can be quickly charged via USB port. Powered by dual 18650 batteries (NOT INCLUDED), it is able to reach up to an output power from 5W to 220W.
Best Arctic Dolphin Kurve ModParameters as below:
Size: 45mm*89.4mm*36mm
Temp Control: 200~600’F (100~315’C)
TC Resistance Range: 0.06~1.0ohm
Watts Resistance Range: 0.06~3.0ohm
Work Input Voltage Range: 6.4~8.2V
Max Output Voltage: 7.5V
Max Output Current: 40A
Charge Input Voltage Range: 4.75~5.5V
Charge Port: Micro USB
Thread Type: 510

Features as below:
1. Unique appearance.
2. Powered by dual 18650 batteries, it can fire up to 220w output.
3. Has a 0.96inch OLED white screen, the screen display will inform you essential parameters you need.

Wanna try it? Just order here now: https://vapesourcing.com/arctic-dolphin-kurve-mod.html

Secondly is the Vsticking VK530 Box Mod

Vsticking VK530 Mod is an ergonomic body mod with a visually striking graffiti print. There is a large TFT IPS display on the center that shows vape data in full color, and there has a car dashboard theme that features speedometer style wattage or temperature. Vape data on this display includes indicators for current temperature/power, resistance, voltage, battery indicator bars and more. You may also customize the background of the screen to your liking by uploading 5 to 10 wallpapers which is somewhat unique when it comes to mods. Powered by dual 18650 batteries with the YiHi SX530 chip and the SXI-Q control system, the VK530 can fire up to 200W maximum output and supports SS316L, Ni200, Ti01, SX Pure, and Manual TCR Ni. Vsticking VK530 adopts the new output mode: Joule mode, that has an atomizer range of 0.05ohm to 1.5 ohm and standard resistance is 0.06 to 1.0 ohm. Moreover, there are also many safety features built into the device. These include low voltage, low resistance, high input voltage, overheat, short circuit and reverse polarity protection.
Best Vsticking VK530 ModParameters as below:
Battery type: 2* 18650 Batteries(Not Included)
Wattage Output Range: 1-200W
Display: 1.3″ TFT IPS HD Screen
Maximum Voltage Output: 7.5V
Maximum Joule Output: 10-120J
Temperature Range: 212-572°F/100°-300°C

Features as below:
1. Luxurious Gold Accented Design, Bottom Hinged Battery Door
2. Powered by dual 18650 Batteries, it can fire up to 200w maximum output.
3. Joystick Operation, Intuitive Firing Button
4. Advanced YiHi SX530 Chipset
5. Multiple Protection systems

Wanna try it? Just order here now: https://vapesourcing.com/vsticking-vk530-mod.html

Related blog: Hava Firefly Kit 80W With Cool 7-Color LEDs Display

228W Hugo Vapor Asura Mod – Combines Squonk & TC In 1

228W Hugo Vapor Asura Mod is the first device that combines a TC box mod and squonk mod in a compact unit, which means that it comes with detachable squonk system for squonk enthusiasts. Constructed by zinc alloy, the Asura is durable to use. The 0.96-inch square display shows the function of the clock, temperature control, and the variable wattage. Powered by dual 18650 cells with the GT228 chipset, the Asura can fire up to 228W maximum output which can supports Ni/Ti/SS/TCR/Clock function modes. Both Squonk fans and regular TC box mod lovers will happy to see the Hugo Vapor Asura Squonker Box Mod. 5 colors are optional.
228W Hugo Vapor Asura Price
Parameters as below:
Size: 88 x 46 x 50mm/88 x 46 x 35mm(w/o squonk system)
Material: Die Zast Zinc-Alloy Material
Max Wattage: 228W
Battery: 2 x 18650 cells (Not included)
Display: 0.96-inch
Resistance: 0.06-3.0ohm
Charging: 5V/2A USB Port
Modes: VW/TC(Ni,Ti,SS)/TCR/Clock function
Thread: 510

Features as below:
1. Switchable between TC and squonk MOD
2. Dual external 18650 cells with 228W
3. Powered by GT228 Chipset, Detachable squonk system
4. 0.96-inch OLED display
5. No overhang with 26mm tanks
6. Firmware upgradeable
7. 2A quick charge

Would like to have a try? Just order from the best online vape store now:
https://vapesourcing.com/hugo-vapor-asura-mod.html

And you may also like these:
vaporesso armour pro kit for sale
smok g-priv baby kit luxe edition for sale

Related Blog: 80W Smoant Campbel Kit – Bring You Mixed Flavors