Freemax Marvos X kit – coming soon with a garland

After a short break, we return to our new product. First, let’s warm up with Freemaxvape’s update. Not long ago, we witnessed a “very bright release”. Let’s get to know Freemax Marvos X today.

buy Freemax Marvos X Pod Mod Kit
buy Freemax Marvos X Pod Mod Kit

I would like to believe that after trying to build on success, the developers decided to go with a younger version.

Parameters
Dimensions: 100.75 x 32.77 x 26.2mm
Case material: metal + plastic
Power: 1 x 18650
Chipset: FM CHIP 2.0
Power: 5 – 100W
Voltage range:0.7 – 4.2V
Operating mode: Power, VPC, Smart, BYPASS
Supported resistance: 0.1 – 3.0Ω

With a complete atomizer, it’s a mess, and the creators say it’s like a Freemax Pod, or simply, a cartridge. Again, the latter doesn’t even bother to show the box mod connector. At your own risk, I’m assuming this mod still has a standard 510 connector and the tank is nothing more than a Pod Tank or a cartridge with a metal base and the aforementioned connector.

Again, the postscript “toolkit” in the novelty’s name alludes to this. It is refilled from above – a liquid with a sliding structure – a decent capacity. The tank is powered by a replaceable vaporizer of the MS series, mainly for sub-ohm samples fabricated according to the authors’ technique.

best Freemax Marvos X Pod Mod Kit
best Freemax Marvos X Pod Mod Kit

Adjustment of the puff intensity is naturally provided – a swivel ring at the base of the atomizer. The box mod itself is made in the corporate style that we saw in the “predecessor”. The case is metal, with dimensions, and then they managed to screw it up.

The control panel also has a familiar cut, large adjustment and control keys are adjacent to a standard diagonal color display. Of the innovations, the device lock slider at the bottom. The modern-style charging connector promises fast charging with a current of 2A.

The battery compartment is covered with a removable cover on the back of the box mod. The in-house developed control chipset promises increased power and a good, although obviously not the best, set of options.

Other kits you may prefer:
r and m tornado 7000 vape Pennsylvania
mr fog max air Illinois

SMOK RPM 5 Pro Pod kit – just the older version of the 5th generation?

We continue to get acquainted with new products from the SMOK Tech brand – the old version is a close second. As I said, there isn’t much difference between the participants posted in pairs. Let’s try to focus on SMOK RPM 5 and Smok RPM 5 Pro.

SMOK RPM 5 Kit review
SMOK RPM 5 Kit review

Parameters
Dimensions: 95.8 x 31.2 x 29.5mm
Weight: 100.7g Body
material: metal + plastic
Power: 1 x 18650
Cartridge capacity: 6.5ml Vaporizer
resistance: 0.15 / 0.23Ω
Wattage: 5 – 80W
Voltage range: 0.8 – 4.0V
Operating mode: VW
Supported resistance: 0.15 – 2.0Ω

It’s not hard to guess that the design of the new Smok RPM product is the same. That is, a metal casing with an almost regular square profile, adorned with panels. The look is quite nice and strict – the designers obviously worked hard. As for size, the “pro” version is expected to be larger, but that only affects the height – the difference is 6.6mm.

The rest of the measurements are the same. On the other hand, since there is no built-in battery, the weight can be reduced – 22 grams. The new product “one for two” removable cartridges. It features a very decent capacity, quick and easy refueling – top – via a sliding structure.

SMOK RPM 5 Pro Kit for sale
SMOK RPM 5 Pro Kit for sale

The mouthpiece is traditionally one-piece, apparently designed for hookah puffs. The novelty is several replaceable sub-ohm vaporizers. The latter belongs to the RPM 3 series, I don’t think these are new instances.

The versions here are indistinguishable from each other. Provides suction intensity adjustment – there is a small slider on top of the battery compartment.

The main boby of Smok RMP 5 pod cartridge is equipped with a full-fledged control panel featuring large activation buttons with convenient anatomical recesses.

A little lower is an almost standard diagonal color display, a rocker for setting the keys and a connector for charging modern samples. According to the brand’s long tradition, the current flow in it is not the fastest.

By the way, it is through this element that you can visually distinguish the models – in the “Pro” version, it is located directly on the control panel. If you would like to learn more details, here we recommend you click the product page: https://vapesourcing.com/smok-rpm5-pro-kit.html

Other vape devices you may be interested:
voopoo drag s pro Georgia
drag x pro colors California

Review: Should You Grab Voopoo Drag X Pro an A pro?

The newer versions of Drag X and Drag S now include TPP X Pod Tank, which is an updated version of TPP Pod Tank with an updated/upgraded filling system. Both still use the same TPP coil, however, you can use several variants of the TPP coil.

VOOPOO TPP X Pod Cartridge kaufen
VOOPOO TPP X Pod Cartridge kaufen

Features
1 x Drag X Pro Device
1 x TPP-X Pod Tank (5.5ml – 2ml TPD)
1 x DM2 Coil – 0.2Ω
1 x DM3 Coil – 0.15Ω
1 x USB-C Cable
1 x 18650 Adaptor
1 x User Manual

In general, Voopoo is known for having its own Pod-Tank and no flat-top equipment. The most popular products in this category are Drag X and Drag S, as well as Argus Pro and Argus Mini.

If you use a battery adapter, Drag X Pro will use a single 21700 battery or 18650 battery, and can transmit up to 100 watts of power. Drag S Pro uses a built-in 3000mAh battery that can provide up to 80 watts of power.

VOOPOO Drag X Pro kit for sale
VOOPOO Drag X Pro kit for sale

Depending on the kit you use, you will get slightly different TPP coils to better match the power output and battery capacity of the device. But you can still use any available coil on any device. But in general, the Gene chip is a very good chipset in all its versions.

Other kits we recommend:
argus pro vape in stock
aegis hero kit for sale

Take a Quick look at Vaporesso Target PM80 Kit

As a popular and famous manufacturer, Vaporesso always brings us many surprises. Today, I will review the fantastic Vaporesso Target PM80 Kit.

The Vaporesso Target PM80 Kit driven by 2000mAh built-in battery is capable of firing up to 80W. The Target PM80 is a Sun-ohm vape kits that super hits your DTL vaping.

vaporesso target pm80 kit

Integrated with Vaporesso patented ANON chip that fires in 0.001s as you click the button, max output of 80W allows for the massive vapor production. Features 0.96” TFT Screen shows almost everything you are wondering to know when you are vaping.

Vaporesso Target PM80 cartridge can hold 4ml e-liquid with the latest in coil technology for flavorful and huge vapor.

The Vaporesso Target PM80 Kit comes with two pods. Both of the pods have 4ml capacity and feature the plug and play design for easy installing. The pod is placed by strong magnets. You can simply remove it by pulling out.

The Target PM80 comes with two coil in the box, both from the brand new Vaporesso Target PM80 GTX coil series – a 0.3ohm coil rated for 32W – 45W, a 0.2ohm coil rated for 45W – 60W.

The Vaporesso Target PM80 Kit is a small, well-built and portable DTL vape device.

Parameters
Size: 102mm * 24.8mm * 33.4mm
Battery: Built-in 2000mAh
Power Output: 5-80W
Cartridge Capacity: 4ml/2ml(TPD)
Display: 0.96″ TFT Screen
Charging Current: 2A
Charging Port: Micro USB
Resistance (rec-watt): GTX 0.2Ω Mesh Coil (45–60W), GTX 0.3Ω Mesh Coil (32-45W)
Colors: Red, Green, Black, Blue, Brown, Silver

You may also want

smok species kit

novo vape

Hotcig MARVEL 40 POD Kit – honeycomb, + 10W and a new atomizer

The second-ranked product is not the hottest new product, but it has not yet appeared on our portal. Of course, you remember last year’s Hotcig brand update-MARVEL Pod Kit.

Therefore, at the beginning of this year, due to unknown reasons, the equipment was updated. This may be the reason why the first edition has never been on the shelf, which caused confusion among brand admirers.

Hotcig Marvel 40 Pod System Kit review
Hotcig Marvel 40 Pod System Kit review

However, an updated version of the pre-order has been immediately published in multiple online stores-it is time for us to know her. Let us take a look today, Hotcig Marvel 40 AIO Pod System Kit.

Parameters
Dimensions: 91 x 39 x 20mm
Weight: 80g
Case material: zinc alloy + plastic
Power: built-in 1200mAh
Chipset: HM chip
Cartridge capacity: 2ml
Evaporator resistance: 0.4Ω
Output power: 1 – 40W
Voltage range: 3.3 – 4.2V Operation
mode: VW, BYPASS Mode, CUSTOM DIY Mode
Supported resistance: 0.3 – 3.0Ω
Protection: against low / high resistance, from overheating, from short circuit, from overcharge / overdischarge
Connector type: magnetic
Screen / diagonal: yes, 0.91
Micro-USB port / charging: yes, charging current 1A

As you can see, the exterior has not fundamentally changed. The same construct, the form factor, too, and the dimensions are absolutely identical. Visually, a new product can be distinguished from the old version only by the proposed design palette. The first version was executed in monocots, while the second revision appeared in a motley avant-garde guise.

buy Hotcig Marvel 40 AIO Pod System Kit
buy Hotcig Marvel 40 AIO Pod System Kit

The next difference is complete vape tank, now only one type is offered. Yes, and he lost in resistance and is now executed on the grid. Most likely, the service bases from the ancestor can also be used in the new product. Well, the final change was an increase in power by 10W, moreover, the functionality migrated from the pioneer.

Related kit you may prefer:
joyetech exceed grip pro

Smoant Knight 80 Kit review – with fairly concise design and five body colors

Today we offer to read about the new representative of the format of Pod- mods called Knight 80 Kit from the Chinese from Smoant. At one time, the well-known Chinese company Smoant was one of the first on the market who thought of adding a service base to the maintenance-free Pod-format devices at that time.

Smoant Knight 80 Mod Pod Kit revieww
Smoant Knight 80 Mod Pod Kit revieww

Features:
Dimensions: 90mm * 45mm * 27mm
Power: 18650
Material: Zinc Alloy
Display: 0.96 ″ OLED
Charging: USB Type-C 5V / 1A
Output Power: 1-80W
Capacity: 4ml
Operating Modes: VW, DVW, BYPASS, TC, TCR

So, the first such device was the notorious Pasito Rebuildable Pod Kit, which received a lot of rave reviews from users and became a real bestseller. Today we have to get acquainted with the next serviced “hearth” from Smoant with much more extensive functionality.

The Smoant Vape Knight 80 Kit is, as you might have guessed, the now popular “sub-mods” format and has in its design features from these two classes of devices. The novelty is released in a fairly concise design and five body colors with colorful small inserts.

buy Smoant Knight 80 Mod Pod Kit
buy Smoant Knight 80 Mod Pod Kit

The vape device is distinguished by a thoughtful design and consists of a battery pack, as well as a cartridge. The latter has a solid capacity, side refueling through a rubber plug and airflow adjustment using a swivel ring under the 510 drip tip type.

In addition, the BB and cartridge are mounted using a magnet and are equipped with child protection. The battery pack, in turn, is made of zinc alloy, supports replaceable 18650 batteries and even charges via USB Type-C port with a current of up to 1A.

Related pod we recommend:
cheap smok alike

Is Snowwolf Wocket Better Than Exceed Grip At Flavor Production?

Recently many of my blog readers asked me to recommend some reliable MTL vape device. So in the following, I’m gonna make a comparison between two pod vape kits separately from Joyetech and Snowwolf. Both of them are around 1000mAh, which can last you a long vaping time.

Firstly is the Snowwolf Wocket Kit—a powerful all-in-one pod system kit that is easy to use and carry. The Wocket features an adjustable wattage mode and can fire all the way up to 25 watts. It features a robust 1150mAh built-in battery capacity with an easy to read 0.69 OLED display screen. In addition, the Wocket features a unique celluloid/resin panel design on a sturdy and lightweight zinc alloy construction.
Snowwolf Wocket PriceThe Wocket features an independent wattage adjust button along with a large fire button for immediate satisfaction. Moreover, it utilizes a refillable pod/cartridge system with a potent X-Grid kanthal mesh coil designed for incredible flavor and vapor production. The Wocket features double airflow channels with an adjustable airflow control ring for both mouth to lung and direct lung users.

Then is the Joyetech Exceed Grip Kit. Crafted from durable zinc-aluminum alloy, the Exceed Grip Pod System combines a whopping 1000mAh Rechargeable battery within the chassis to provide a reservoir of battery to operate the intelligent variable voltage output system. Utilizing either a 3.5mL or 4.5mL capacity pod, it can choose a direct-to-lung draw style with the 4.5mL standard cartridge selection and pre-installed 0.4ohm EX-M Coil.
Joyetech Exceed Grip ReviewIn addition, the Exceed Grip can utilize the 3.5mL pod cartridge to optimize for nicotine salts, complete with a restricted MTL draw style. Furthermore, the Exceed Grip installs the innovative pod in a sideways fashion, allowing the juice reservoir to be completely vaporized, discernable via clear juice viewing window.

Related blog: Dedicated To The Brave-220W Tesla P226 Kit Preview