Pod Mod Kit Archives - Page 2 of 2 - Most Insightful Vaping Devices Reviews And First Hand Vaping News

Hotcig MARVEL 40 POD Kit – honeycomb, + 10W and a new atomizer

The second-ranked product is not the hottest new product, but it has not yet appeared on our portal. Of course, you remember last year’s Hotcig brand update-MARVEL Pod Kit.

Therefore, at the beginning of this year, due to unknown reasons, the equipment was updated. This may be the reason why the first edition has never been on the shelf, which caused confusion among brand admirers.

However, an updated version of the pre-order has been immediately published in multiple online stores-it is time for us to know her. Let us take a look today, Hotcig Marvel 40 AIO Pod System Kit.

Parameters
Dimensions: 91 x 39 x 20mm
Weight: 80g
Case material: zinc alloy + plastic
Power: built-in 1200mAh
Chipset: HM chip
Cartridge capacity: 2ml
Evaporator resistance: 0.4Ω
Output power: 1 – 40W
Voltage range: 3.3 – 4.2V Operation
mode: VW, BYPASS Mode, CUSTOM DIY Mode
Supported resistance: 0.3 – 3.0Ω
Protection: against low / high resistance, from overheating, from short circuit, from overcharge / overdischarge
Connector type: magnetic
Screen / diagonal: yes, 0.91
Micro-USB port / charging: yes, charging current 1A

As you can see, the exterior has not fundamentally changed. The same construct, the form factor, too, and the dimensions are absolutely identical. Visually, a new product can be distinguished from the old version only by the proposed design palette. The first version was executed in monocots, while the second revision appeared in a motley avant-garde guise.

The next difference is complete vape tank, now only one type is offered. Yes, and he lost in resistance and is now executed on the grid. Most likely, the service bases from the ancestor can also be used in the new product. Well, the final change was an increase in power by 10W, moreover, the functionality migrated from the pioneer.

Related kit you may prefer:
joyetech exceed grip pro

Smoant Knight 80 Kit review – with fairly concise design and five body colors

Today we offer to read about the new representative of the format of Pod- mods called Knight 80 Kit from the Chinese from Smoant. At one time, the well-known Chinese company Smoant was one of the first on the market who thought of adding a service base to the maintenance-free Pod-format devices at that time.

Features:
Dimensions: 90mm * 45mm * 27mm
Power: 18650
Material: Zinc Alloy
Display: 0.96 ″ OLED
Charging: USB Type-C 5V / 1A
Output Power: 1-80W
Capacity: 4ml
Operating Modes: VW, DVW, BYPASS, TC, TCR

So, the first such device was the notorious Pasito Rebuildable Pod Kit, which received a lot of rave reviews from users and became a real bestseller. Today we have to get acquainted with the next serviced “hearth” from Smoant with much more extensive functionality.

The Smoant Vape Knight 80 Kit is, as you might have guessed, the now popular “sub-mods” format and has in its design features from these two classes of devices. The novelty is released in a fairly concise design and five body colors with colorful small inserts.

The vape device is distinguished by a thoughtful design and consists of a battery pack, as well as a cartridge. The latter has a solid capacity, side refueling through a rubber plug and airflow adjustment using a swivel ring under the 510 drip tip type.

In addition, the BB and cartridge are mounted using a magnet and are equipped with child protection. The battery pack, in turn, is made of zinc alloy, supports replaceable 18650 batteries and even charges via USB Type-C port with a current of up to 1A.

Related pod we recommend:
cheap smok alike

Is Snowwolf Wocket Better Than Exceed Grip At Flavor Production?

Recently many of my blog readers asked me to recommend some reliable MTL vape device. So in the following, I’m gonna make a comparison between two pod vape kits separately from Joyetech and Snowwolf. Both of them are around 1000mAh, which can last you a long vaping time.

Firstly is the Snowwolf Wocket Kit—a powerful all-in-one pod system kit that is easy to use and carry. The Wocket features an adjustable wattage mode and can fire all the way up to 25 watts. It features a robust 1150mAh built-in battery capacity with an easy to read 0.69 OLED display screen. In addition, the Wocket features a unique celluloid/resin panel design on a sturdy and lightweight zinc alloy construction.
Snowwolf Wocket Price The Wocket features an independent wattage adjust button along with a large fire button for immediate satisfaction. Moreover, it utilizes a refillable pod/cartridge system with a potent X-Grid kanthal mesh coil designed for incredible flavor and vapor production. The Wocket features double airflow channels with an adjustable airflow control ring for both mouth to lung and direct lung users.

Then is the Joyetech Exceed Grip Kit. Crafted from durable zinc-aluminum alloy, the Exceed Grip Pod System combines a whopping 1000mAh Rechargeable battery within the chassis to provide a reservoir of battery to operate the intelligent variable voltage output system. Utilizing either a 3.5mL or 4.5mL capacity pod, it can choose a direct-to-lung draw style with the 4.5mL standard cartridge selection and pre-installed 0.4ohm EX-M Coil.
Joyetech Exceed Grip Review In addition, the Exceed Grip can utilize the 3.5mL pod cartridge to optimize for nicotine salts, complete with a restricted MTL draw style. Furthermore, the Exceed Grip installs the innovative pod in a sideways fashion, allowing the juice reservoir to be completely vaporized, discernable via clear juice viewing window.