Thinner And Lighter Than The VINCI-VOOPOO VINCI AIR Kit 30W

The VINCI range has been a big hit in recent months. This time VOOPOO come back again with their latest VINCI AIR which is much cheaper than its predecessors and also easier to use. In the following are more details about it. For vape buy one get one free, just check vapesourcing online shop.

VOOPOO VINCI AIR Kit basically continues the form factor of its predecessors but 30% thinner and 20% lighter. Moreover, it adopts the same matte metal painting process as cars and has a further texture. Powered by a built-in 900mAh battery and driven by a GENE.AI Chip, VINCI AIR can be activated either by inhaling or via a fire button and features a wide output range from 5-30W. Charging is done via a 5V/1A micro USB port on the side of the device, and there is a beautiful, inward-looking screen that displays parameters and the number of suction ports in real-time.
VINCI AIR ReviewAs for the pod, it has a maximum capacity of 4ml and is still refilled via a side filling port. With purchase, you can get two dedicated coils from the kit, 0.6Ω PnP-VM4 for massive vapor, and 1.0Ω PnP-R2 for excellent MTL experience. In addition, the pod is compatible with several other PnP coils, just pull and push and then enjoy different vaping experience, fast and affordable. Airflow-wise, VINCI AIR retains the innovative Dual Airflow System. Try turning the atomizer 180° and inserting it, you will get two completely different mouthfeel experiences. Lastly, the airway design has been specially optimized, bringing unparalleled comfort to MTL and Half-DL.

You may also like: rpm40 near me

Parameters as below
Material: Zinc Alloy+PCTG
Size: 100.9 * 27 * 18mm
Battery: 900mAh (Built-in)
Power Range: 5-30W
Output Voltage: 3.2-4.2V
Capacity: 4ml/2ml (TPD)
Resistance Range: 0.1-3.0ohm
Standard Coils: PnP-VM4 0.6ohm / PnP-R2 1.0ohm
Compatible Coils: PnP-VM3 / PnP-R1 / PnP-RBA
Colors: Carbon Fiber, Camouflage, Space Gray, Classic Blue, Classic Red, Aurora, Aurora Blue

Related blog: Guides To The 80W Mechlyfe Ratel XS Kit

Guides To The 80W Mechlyfe Ratel XS Kit

Which device is the best pod vape system in your mind? In mine, it is the Ratel XS by MECHLYFE. Let me share it in the following, and you can buy from vapesourcing online shop if interested.

MECHLYFE Ratel XS Kit is quite different from its predecessor though they share a similar name. As with the original Ratel, Ratel XS is still powered by a single 18650 battery and can fire from 5-80W. Apart from the VW mode, it also supports VV mode, TC mode (Ni/Ti), and BYPASS mode, this offers you more fun of operating. On the front of the device is where the display screen and firing button is located. On the inside, when taking off the panel, is where you’ll see both the wattage adjustment buttons and pod cartridge.
ratel xs aioSpeaking of the pod cartridge, it has a huge capacity of 5.5ml and supports coil building, refilling is done via an easy top filling structure. Inside the pod is a two-post build deck, it allows you to install your own coils. Wicking is quite easy too since there are two generously sized wicking channels. Simply fluff your cotton, and gently pack it into the channels, and you’re good to go. At last, there is an AFC ring on the bottom of the pod, with it you can tailor the airflow as you want effortlessly. Overall, you can not go wrong with the Ratel XS.

You may also like: lyra pod near me

Parameters as below
Dimensions: 87mm x 52mm x 25mm
Material: Aluminum + Resin
Battery: 1 x 18650
Modes: BYPASS/VV/VW/TC/Ni/Ti
Output Wattage: 5-80W
Temperature: 200℉-600℉
E-liquid Capacity: 5.5ml
Voltage: 0.5-8V Adjustable
Resistance Range: 0.05-3.5ohm
Colors: Black & Carbon Fiber, Gun Metal & Carbon Fiber, Brushed SS & Carbon Fiber, Brushed Gun Metal & Carbon Fiber, Black & Resin White, Black & Resin Green, Black & Resin Red, Black & Resin Blue

Related blog: A Perfect Combination Of Metal & Leather | IJOY Jupiter Kit 70W

A Perfect Combination Of Metal & Leather | IJOY Jupiter Kit 70W

We all know that pod mod devices have almost completely taken over the vape market, this time the bandwagon has driven through IJOY-land! Let’s take a look at the IJOY Jupiter Kit, don’t miss out on it if you like.

IJOY Jupiter Kit perfectly combines fashionable design with metal and leather, so it not only looks good but also feels comfortable in the hand. Powered by a single 18650 battery and driven by the advanced UNIV chipset, it can fire from 5-70W and features a range of safety features. The control face is located on the front of the device, a glossy panel hides a fire button, a 0.96inch TFT color display screen, two adjustment buttons, and also a micro USB port. Charging is done via the USB port and the screen will show all your vaping data.
IJOY Jupiter ReviewAs for the pod, it has a whopping capacity of 5ml and is refillable via a bottom filling port. With purchase, you can get a 0.2ohm J1 Mesh Coil and a 0.6ohm J2 Mesh Coil. But don’t assume that the device only applies to DTL vaping as the pod is also compatible with an RBA coil. Moreover, the mod can also work with a 510 adaptor which allows you to use standard 510 fitment tanks. At last, the airflow is not adjustable on this device, but this is nothing much if you are not very strict in it. Overall, I think the Jupiter Kit is worth a shot.

You may also like: target pm80 near me

Parameters as below
Material: Aluminium & Zinc Alloy & Leather
Size: 117(height) * 30(length) * 25.5(width)mm
Battery: Single 18650 (Not Included)
Output Power: 5-70W
Output Voltage: 3.2-4.2V
E-juice Capacity: 5ml
Fill Method: Bottom fill
Fill Type: Silicone cover
Screen: 0.96 inch
Charging Port: Micro-USB port

Related blog: Even Better Than Vinci Series? | VOOPOO Navi Kit

Similar To Lost Vape Orions But Better | Wismec Preva DNA Kit 1050mAh

Are you a fan of Orion series by Lost Vape? If so, then you may also like the Wismec Preva DNA we’ll be covering here as it features a similar design and identical chipset of the Orion DNA GO and Orion Plus. Just buy from the vapesourcing online shop if you like.

Wismec Preva DNA Kit is a combination of advanced technology and high-level craftsmanship. Powered by a built-in 1050mAh battery, it allows for up to 20W of power that can be personalized to three different output levels. An LED light on the side indicates if power is set to low (yellow), medium (green) or high (blue). There is also replay technology to remember your chosen flavor setting. For better performance, you can customize all the settings via eScribe from Evolv. This software permits configuration, modification, and monitoring of any DNA device.
Preva DNA PriceAs for the pods of the Preva DNA, they can store up to 3mL of e-liquid and can be refilled via a top filling structure. Two pods are included with purchase, both of which are built with alternate coils. The first is a 0.25ohm vapor-focused pod that results in DTL vaping or you may prefer the flavor-focused 0.5ohm coil which may be compatible with nicotine salts and results in an MTL vape experience. At the bottom of the drip tip, you can twist a ring to regulate airflow. With this design, you may set the unit to a restricted or wide-open setting or somewhere in between.

You may also like: aegis mod cena

Parameters as below
Size: 96mm * 43mm * 18.6mm
Battery Type: Built-in 1050mAh
Cartridge Capacity: 3ml
Maximum Wattage Output: 20W
Coil Type: 0.25ohm DL Coil and 0.5ohm MTL Coil
Three Power Outputs: Low (Yellow), Medium (Green), High (Blue)
Multiple Protection: Timeout Protection, Low Voltage Protection, Short Circuit Protection
Charging Port: MicroUSB Port-1A Max Current

Related blog: An Unmissable Vape Pen For MTL Vaping | Innokin Endura T18II Mini Kit 1000mAh