This time we’ll be covering the Innokin Sensis Kit. It is classed as the first set-up in a new wave of vape devices known as Fourth Generation Vaping Technology, so what exactly is it? Here are more details.
On the technical level, what sets the Sensis apart from the crowd is the new Coil+ Mode that primes the coil at the end of each puff. What this does is draw more vape juice into the coil which has as a further benefit that it also reduces the carbon inside each head. This process involves the mod running power output at just 40% for 0.4s at the end of each puff, thus permitting more flavor-rich vapor production. Moreover, you may manually refresh the coil between hits to enhance wicking, bringing in more flavor, and extend the coil’s longevity. Inside the device, there is a 3000mAh cell that may last all day on a full charge. But, if you do need to recharge the battery, a USB-C input on the control face is sure to complete the process fast and safely. The battery can produce up to 40W of power, but you may adjust this setting via the full-color screen and dual adjustment buttons. The user interface on the display shows vape data in a vertical orientation and includes all the essential information such as mode, battery charge level, current power level, coil resistance, puff stats, and more.
Each Innokin Sensis replacement pod is held by powerful magnets inside the mod and utilizes new glass that improves taste while preventing corrosion, known to occur when certain vape juices are used with plastic pods. Moreover, the pod can store 3.1ml of e-liquid and features a very easy refill method at the bottom of the atomizer. The coil system that is used is identical to the one found in the Sceptre Kit by Innokin, but there’s a new S-coil that does not work with the previous vape kit. With purchase, you will actually receive the Sceptre-S coil pre-installed with a 0.25ohm/25-30W heating element for a restricted DTL style vape with regular juices. Or, if you prefer an MTL vape experience, you should install the 0.65ohm included coil that operates from 9-12W. Finally, design-wise, the Sensis Kit looks amazing thanks to a gunmetal frame that is available with a grip in either ultra pink, desert brown, carbon, navy blue, or jet black.
You may also like:
geekvape m coils price
vinci 2 review
In this article, I’m gonna introduce the Vinci X 2 Kit by VOOPOO. If you are looking for a powerful pod mod device powered by the 18650 battery, this is surely what you want. Here are more details.
The Vinci X 2 utilizes a difficult to manufacture single plating/grain process to permit the refraction of light. This results in an appearance that reflects different coatings and textures for a dazzling effect. On the control face, you will see a huge display screen with full-color font and the ability to change the theme colors. But, that’s not all. There are actually two different UIs to choose from. Near the top of the mod, there’s a physical slider that can be maneuvered left or right to fully open or close the air intake. This means you can really experience your favorite puff setting in combination with whatever coil you choose.
Powering the kit is a 18650 battery, while it is onboard you may recharge it via a Type-C USB port that has a 2A current. Built with the newest Gene AI 2.0 chipset, the device can operate with up to 80W of power. You may adjust wattage from 5W and operate in several different modes such as the power, smart, and RBA settings. In smart mode, the coil inside the pod is instantly recognized for the best possible vapor production, while the RBA mode has no limitations whatsoever, so it is only recommended for veteran vapers. For safety reasons, the chipboard also has integrated safeguards such as overtime, short circuit, overcharge, over-current, over-discharge, reverse polarity, and maximum power protection.
The Vinci X 2 cartridge can store a massive 6.5mL of vape juice, refilled via a side-fill plug to make the process effortless. The mouthpiece at the top is flat, making it comfortable in the mouth while enhancing airflow via airflow holes that produce smoother airflow and better vapor production. The X 2 also uses Navi coils of which there are 9 different versions. With purchase, you will get both a 0.3ohm Pnp-VM1 and a 0.15 PnP-VM6 Coil. The VM1 has a single mesh heating element with a 32 to 40W range, while the VM6 should be used from 60 to 80W. Best of all, these coils use a simple push/pull installation process to make the process fast and mess-free. The coils are also quite affordable.
You may also like:
smok ipx 80 price
morph 2 vape colors
In the following, let’s look at the Morph Pod 40 Kit by SMOK. While it’s yet another pod mod to add to SMOK’s vast lineup, it’s definitely a great addition. Its unique form factor, ease of use, and coil compatibility make it a solid option for those who want a medium-powered pod vape. Here are more details.
The SMOK Morph 40 is a highly ergonomic device that features a unique arch design, making it incredibly comfortable to hold. Powered by an internal 2000mAh battery that can be charged with a USB Type-C cable, the Morph Pod-40 can fire from 5-40W. Aside from the unique shape, two features that make it stand out from the other pod vapes on the market are the firing bar and screen. The 0.91″ display can rotate horizontally or vertically depending on how you hold it, which will certainly make your experience that much more convenient.
Included with the Morph POD-40 Kit in vapesourcing vape shop online is a single refillable pod cartridge. This pod holds a maximum e-juice capacity of 3.7ml and can be filled from the top. There are two different coil heads that come with this kit too. The first is a 0.4ohm mesh coil and the other is a triple 0.6ohm coil. What’s great about the Morph pod cartridge is that it’s compatible with the entire SMOK RPM Coil line, so you’ve got plenty of options. Lastly, the SMOK Morph Pod-40 has an adjustable airflow system that’s located at the top.
You may also like:
cheap vape requiem bf kit