When choosing vape atomizers, I always consider heat sinking as an important indicator as it will directly affect the final flavor. This time we’ll take a look at a very unique RDA atomizer called Asmodus Barrage, it was specially designed with unique heat sinking design and hidden airflow system. Let’s dive down.
Asmodus Barrage RDA is a result of the collaboration between Asmodus and the YouTube Vape Reviewer VapingWithThesis. Constructed of premium stainless steel, it is sturdy enough for long term use. A major feature of Barrage is its hidden top airflow system – the airflow inlets are hidden at the top of the barrel where the heat sink fins sit. In fact, this design also solves the issue of e-juice leakage since the airflow inlets are positioned. The slots between heat sink fins funnel incoming air straight down until it reaches the two slopes milled into the deck.
The two slopes then direct the air towards the bottom of the installed coil, allowing your taste buds to go on a journey. The build deck is incredibly big, giving you a large amount of room to build to your heart’s content. Moreover, the two posts on the deck are designed with a massive terminal each for maximized ease of use. Although Barrage’s airflow is non-adjustable, it’s still able to provide perfect draw resistances for deep lung inhales. To meet popular demand, Asmodus have also made the 810 drip tip into goon style, with a large wide bore to give extra airflow.
You may also like: gen mod near me
Parameters as below
Size: 24mm diameter
E-liquid well height: 5.3mm
Drip tip: 810 Drip tip
Material: Stainless steel
Connection: 510 thread and BF pins
Airflow: Non-adjustable top airflow design
Color: Black, Gold, Rainbow, Silver
Related blog: Similar To Lost Vape Orions But Better | Wismec Preva DNA Kit 1050mAh
Have you ever used the asMODus Amighty Kit? This time we’ll be covering the asMODus Viento Tank—the atomizer equipped on the Amighty kit but sold separately now.
asMODus Viento Tank is composed of high-quality stainless steel and pyrex glass, with a removable stainless steel ring designed to help provide a bit of protection in case of accidents. Measuring 26.9mm in base diameter, it can store up to 3.5ml of e-juice (bubble glass 5ml) and adopts a sliding hinged top fill mechanism.
Heating elements included in the set are two 0.18ohm mesh coil heads, besides them, the Viento is also compatible with coil heads of SMOK Baby series. At last, there are three adjustable airflow slots in the base of the tank, which allow users to fine tune the amount of draw resistance for the perfect inhale. Overall, the Viento is no doubt worth a shot!
Parameters as below:
Material: Stainless Steel + Pyrex Glass
Drip Tip: Snakeskin Wide Bore 810 Delrin Drip Tip
Filling: Sliding Hinged Top Fill Mechanism
Coil Resistance: 0.18ohm Mesh Coil
You may also like this: buy smok mag grip
Related blog: New DTL Vape Device From VOOPOO-ALPHA Zip Kit 180W
This time I’m gonna share a fantastic match of a squonk mod regulated and a BF RDA. I have experienced an unprecedented feeling when I vape with them. Hope you’ll like them. Ok, here we go!
Firstly we look at the Dovpo Topside Dual Mod which builds upon the original Topside Mod with even more power and improvements. Powered by dual high-amp 18650 batteries, it can fire up to 200 watts. Meanwhile, it features the same revolutionary top fill squonk design with a 10ml capacity juice delivery system along with an adjustable wattage mode and multiple temperature control modes.
There is also a large and vibrant 0.96″ OLED display screen which can be hidden by activating stealth mode. At last, the Topside Dual is firmware upgradeable and may be charged via the side micro USB charging port. Do you like it?
What I pair with the Topside Dual Mod is the Asmodus .Blank. Constructed of premium stainless steel, the .Blank RDA utilizes a build deck design similar to the Bunker and C4 RDAs, with large, wall-like posts located on each side of the atomizer acting as chamber reducers, condensing the vapor produced in the chamber for peak flavor and vapor production.
You can tight the leads of the coil in place with the use of two hex grub screws, and the outer curved edges of the posts allow for the leads to be trimmed to the perfect length after the grub screws are tightened, making installation a breeze. In addition, the bottom of the large juice well takes a concave form, allowing for any juice fed into the RDA to be funneled towards the wick. Just attach it to the Topside Dual and try your favorite e-juice.
Related blog: Is SMOK MICO Better For Nic Salts Than Vaporesso Renova Zero?
This I’m gonna share a latest vape mod. It is from the Asmodus and called Asmodus Amighty. Just get one from the cheap vape online shop if you like. Ok, here we go!
Asmodus Amighty Mod, powered by single 18650/20700/21700 battery, equipped with the high-quality GX-100UTC chipset, is able to reach up to a maximum output power of 100W. The Amighty Touch Screen Mod has all the usual functionality such as temperature control with support for TFR and TCR, as well as enhanced firing mechanics such as Curve mode and Taste settings (Soft, Normal, and Hard).
Many mods claim to be crafted with ergonomics in mind but this device truly contours to your hand and snugly nestles in your hand. Vapers can simply press the fire button 5x times in quick succession to access the menu. Once in the menu swiping left and right will cycle through all the menu options.
Parameters are as below:
Work efficiency: 94%
Standby time: 3s- 60s
Firing cut off time: 10s
Charging parameter: DC 5V/1A
Display operating current 25mA
Standby operating current: <350uA
Resistance range: 0.1Ω- 3.0Ω
Temp range: 212- 572°F/ 100- 300℃
Maximum output voltage: 7.5 Volts
Maximum output current: 35.0 AMPS
Output power range: 5- 100W (Power Mode)
Output power range: 5- 60W (TC Mode)
Powered by single 18650/20700/21700 battery
(Batteries are Not included)
Related blog: Two Superior Pen Kits You Can’t Miss-Eleaf iJust ECM & Joyetech ULTEX T80